AMS Carbon Bonnet Dampers
25 January 2011, 12:18 AM
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Jul 2010
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
AMS Carbon Bonnet Dampers
Hi Guys,
Just taken our latest delivery of Carbon Bonnet Dampers.
These are available for the Classic and Newage and we have both in stock!
They are available for both STEEL and ALLOY bonnets, each being a different resistance level of damper, so no grief of them being too strong for the alloy bonnets!!
The Retail on these are £69.99 + p&p
Group Buy offer 15% Discount which brings them down to just £59.49 + £3.95 p&p
They come with the complete fitting kit and instructions.
No Need to drill any holes they replace existing bolts on each model
Fitting takes approx 15 mins.
Offer Ends 1st March 2011
We also have a limited number of Silver Carbon dampers for the Classic Alloy bonnet.
Please Visit the Link below and enter SNETGB01 at the checkout stage for your 15% Discount
http://www.alleymotorsport.co.uk/imp...pers-780-p.asp
Just taken our latest delivery of Carbon Bonnet Dampers.
These are available for the Classic and Newage and we have both in stock!
They are available for both STEEL and ALLOY bonnets, each being a different resistance level of damper, so no grief of them being too strong for the alloy bonnets!!
The Retail on these are £69.99 + p&p
Group Buy offer 15% Discount which brings them down to just £59.49 + £3.95 p&p
They come with the complete fitting kit and instructions.
No Need to drill any holes they replace existing bolts on each model
Fitting takes approx 15 mins.
Offer Ends 1st March 2011
We also have a limited number of Silver Carbon dampers for the Classic Alloy bonnet.
Please Visit the Link below and enter SNETGB01 at the checkout stage for your 15% Discount
http://www.alleymotorsport.co.uk/imp...pers-780-p.asp
Last edited by Alley Motorsport; 18 February 2011 at 10:19 AM.
25 January 2011, 12:30 PM
#4
Great, I'll take a black carbon set for my classic with alloy bonnet then. Just have to wait till midnight tomorrow for my paycheck to arrive.
Do I pay with paypal or how do I order?
Thanks
Do I pay with paypal or how do I order?
Thanks
Last edited by Turbovin; 25 January 2011 at 12:36 PM.
25 January 2011, 12:46 PM
#5
Scooby Regular
iTrader: (2)
Join Date: Jun 2008
Location: www.dsoc.co.nr
Posts: 979
Likes: 0
Received 0 Likes
on
0 Posts
Turbovin, with group buys a list that is easy to copy and paste is started then when the desired numbers are down then the payment details are published. I take it that is the case here? Or do you pm us payment details?
1) Turbovin - Black Carbon - Classic - Alloy Bonnet.
2) N_Scooby - Black Carbon - Classic - Alloy Bonnet.
3)
1) Turbovin - Black Carbon - Classic - Alloy Bonnet.
2) N_Scooby - Black Carbon - Classic - Alloy Bonnet.
3)
Trending Topics
26 January 2011, 12:38 AM
#13
Use a magnet (with a cloth or something to avoid scratches or do it on the inside) since aluminium isn't magnetic while a regular steel bonnet is.
Don't know about newages but the classics should only have an alloy bonnet if it's a JDM import.
Don't know about newages but the classics should only have an alloy bonnet if it's a JDM import.
Last edited by Turbovin; 26 January 2011 at 12:45 AM.
02 February 2011, 02:11 AM
#24
Got my dampers today and they looked great.
I'm not sure if I have installed the adapters correctly because now when the bonnet is closed it lookes like it doesn't line up with the front wings as good as before (I'm picky about details though). It might get a bit better after that the dampers have been used for a while I guess.
Also 25 Nm to tighten the alloy bonnet hinge bolts seems a bit high since I started to strip the threads. 20 Nm would probably be enough. Also longer bolts would be good if you are supposed to use both of those black washers.
A couple of pics if someone wants to see what they look like installed. Very happy with them overall, thanks for this GB
I'm not sure if I have installed the adapters correctly because now when the bonnet is closed it lookes like it doesn't line up with the front wings as good as before (I'm picky about details though
). It might get a bit better after that the dampers have been used for a while I guess.Also 25 Nm to tighten the alloy bonnet hinge bolts seems a bit high since I started to strip the threads. 20 Nm would probably be enough. Also longer bolts would be good if you are supposed to use both of those black washers.
A couple of pics if someone wants to see what they look like installed. Very happy with them overall, thanks for this GB
Last edited by Turbovin; 02 February 2011 at 02:18 AM.
02 February 2011, 09:31 AM
#25
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Jul 2010
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Glad to hear you've got them Turbovin
Let them settle for a while and then re-adjust the brackets on the bonnet slightly.
Best thing is to ditch the big black washers and just use the Shakeproof (star) washer!
Thanks for letting us know about the torque setting, things like that are handy to know!
Each Instruction manual is different for every car and it lists the factory torque settings for that model, but we can ammend that.
Many Thanks
Simon
Let them settle for a while and then re-adjust the brackets on the bonnet slightly.
Best thing is to ditch the big black washers and just use the Shakeproof (star) washer!
Thanks for letting us know about the torque setting, things like that are handy to know!
Each Instruction manual is different for every car and it lists the factory torque settings for that model, but we can ammend that.
Many Thanks
Simon
04 February 2011, 01:40 PM
#30
Here is one more from Sweden that maybe is interested. I tried the discount-code on your website, but it doesn't work when EU delivery is selected?
Would the total cost be the same as for Turbovin?
£59.49 + £3.95 for the dampers
£9.99 for the shipping to Sweden
(incl taxes)
Cheers
Jerry
Would the total cost be the same as for Turbovin?
£59.49 + £3.95 for the dampers
£9.99 for the shipping to Sweden
(incl taxes)
Cheers
Jerry
